2022 33′ x 12′ Heavy Aluminum Work Boat Price:$300,000 CDN Built BY marine contractors FOR marine contractors! Transport Canada licensed Team of 6 Canadian Welding Bureau certified all position welders in a state of the art four season workshop located in Southern Ontario... read more

1928 26'6" x 8' x 3.6' Steel Replica Tugboat 27' tugboat replica Boat was originally a lifeboat on a Great Lakes ferry, so has hardly ever been in the water. All supporting and historical documents will be supplied to buyer at time of sale. Original boat is constructed of 1/4" steel Original hull is galvanized at waterline Stern section and wheelhouse were professionally added and are constructed of 1/8" steel plate Original hull is riveted and was built... read more

33' X 10' Workboat With Winch Cummins motor Fitted with a winch Located in Quebec Price: $13,250 CDN... read more

1979 41′ x 14’1 Twin Screw Aluminum UTB/ Workboat/Pilot Boat Price: $220,000 USD With fresh coatings and loads of updates, she’s ready to get to work! Former US Coast Guard vessel 4′ draft Powered by 2 Cummins 6 cta, 480 hp engines, 500 hours ZF gears Electronics: 2 – 12″ Garmins, 2 VHF, radar New shafts, cutless bearings, couplings, props just reworked New bottom and hull paint Comes with lots of spare parts Location: Mississippi... read more

New 19′ x 8′ Aluminum Work/Fishing Tiller Boat Price: Base model starts at $25,000 CDN Fully welded 3/16″ aluminum hull Rated for 90hp Self bailing floor/sole drains overboard Large waterproof storage areas in bow and sides and covered battery storage in transom Waterproof breaker panel LED nav lights Built in fuel tank with gauge Capacity 5 people Custom options available Location: Western Canada File ref W2394... read more

New 15′ x 68″ Aluminum Work/Fishing Tiller Boat Price: Base model starts at $6,500 CDN Fully welded 3/16″ aluminum hull 20″ Transom Capacity 2-4 people Options available: custom lighting and power for electronics, mounts for fish finders and trolling motors, flat floor/sole, non-skid coatings on sole and stepping surfaces, removable seats or cushions, extended bow deck and storage compartment, other custom options available! Location: Western Canada File Ref W239... read more

1974 31’6 x 8’5 Aluminum Work/Crew Boat & Trailer Price: $75,000 CDN This rugged workboat has been re-powered and she’s ready to get the job done! 18″ draft GRT:5.71 Powered by 2 Mercury MerCruiser Quicksilver 350 MPI, year: 2019 Total hp: 520 Berkley jet drives: 2019 New wiring: 2019 Fuel capacity 400 litres 12 passenger Viking fire system Electronics: VHF, Garmin 721xs GPS 3 axle trailer included Location: Southern Ontario... read more

1999 48’10 x 13’7 Aluminum Twin Screw Fishing/Work Boat w/Trailer New Price: $200,000 CDN Previously Transport Canada Approved Stability Book Available GRT: 20.23, NRT: 15.17 Draft approx 3′ Powered by twin Perkins M130C (2014), 130hp each, hours: 900 and 700 Fuel capacity: 693 litres Holding tank capacity: 267 litres Inverter: Tundra HD 2500 Electronics: VHF, depth sounder, compass Hydraulic steering Wabasco heater Safety equipment: fire extinguisher, life ring, ... read more

1980 19.05m x 6m x 11.35m Steel Ex CCG Buoy Tender Built by Canadian Dredge & Dock Co., Kingston, Ontario Class Voyage: Inland Waters II Taken out of service in 2010 Length (LOA): 19.05m Breadth: 6m Depth (moulded): 1.71m Draft: 1.35m GRT: 79.78 tons NRT: 33.34 tons Freeboard: 1m Cruising range: 2000 nautical miles Endurance: 10 days Cruising speed: 10 knots Fuel capacity: 20 m3 Fresh water capacity: 6.2 m3 Fuel Consumption: 0.3 m3 per day Navigation/Communi... read more

1995 17′ x 6.5′ x 1′ Steel Flat Bottom Jet Propelled Work Boat Price: $3,500 CDN •Jet: Hamilton Jet • Engine: 302 Ford Mercruiser- gas • Top speed 30 to 35mph • Great shallow draft work Boat •Includes single axle trailer Located in Port Dover, Ontario... read more

1971 50′ x 14′ x 2′ Ex Navy Twin Screw Cargo Tug Price: $35,000 USD Upgraded hull inside and out, freshly painted 2021 Bought in year 2000 Transmissions: Twin Disc hydraulic Engines:(2) 6-71 engines - both water damaged*** Shafts: (2)2″ shafts Propellers: (2)brass 18″ props Speed 12 knots Fuel capacity:500 gal Bilge pumps: 2 Cargo hold: 12’x 24′ Location: Texas... read more

1980 26′ x 10.5′ Aluminum Work Boat •Price: $25,000 CDN •GRT: 7.68, NRT: 5.76 •Draft: 3.3′ •Powered by Volvo Penta Turbo Twin D3-160 A EVC-B, 2005, 160 hp, 320 hrs •Transmission: SX Cobra, 1.66:1 •1000 lb hoist •500 lb Windlass •Fuel Capacity:80 gal •Fuel Consumption: 9-11 litre/hr •Holding tank capacity: 20 gal •Head: Yes •Sleeps: 2 •Bilge pumps: 2 x 1000 gals, 1 x 750 gals •Electronics: radio, GPS, depth so... read more

2023 16’6 x 6′ Steel Workboat Price: $6,500 CDN 12 gauge bottom, 14 gauge sides 20″ transom Epoxy primed and painted Makes the perfect little run-about! Located in Port Dover, Ontario... read more

1988 28′ x 8’6 Aluminum Work/Crew Boat Price: $35,000 USD 3′ draft Twin Mercruiser 5.7 MPI Bravo 2 outdrives Dual steering stations Runs and drives Push knee Needs bottom paint and a little TLC Location: New York State... read more

2001 19′ x 8’6 SeaArk Aluminum Work Boat w/trailer Price: $20,000 USD 18″ draft No motor (had a 225 hp Mercury Optimax 2006) 4 picking eyes Comes with trailer Location: New York State... read more

1995 19′ x 8’6 SeaArk Aluminum Work Boat Price: $30,000 USD 18″ draft Mercruiser 5.0 MPI, 260 hp VHF radio Location: New York State... read more

2021 25′ x 6’8 Steel & Aluminum Work Boat w/200 hp Evinrude and Trailer Price: $55,000 CDN This is the one you’ve been waiting for! Steel hull with aluminum pilot house and sole Draft is 6″ Powered by 200 hp Evinrude E-TEC G2 outboard (2018), 90 hours Viper prop Cruises at 25 mph Electronics: GPS, Direction finder, Depth sounder, Compass Hydraulic steering Fuel capacity: 25 gallons Bilge pump Comes with new tandem trailer Located near Port Dover, Ont... read more

2022 21′ x 7′ Aluminum Work Boat w/70 hp Suzuki and Trailer Price: $45,000 CDN Meet the next great addition to your fleet! Welded aluminum modified v hull 3/16″ hull 1/8″ sole 1 1/2″ pipe gunnels 2 spud pockets 4′ work platform Motor is 2022 Suzuki 70 hp, 0 hours, Model DF70ATL Aluminum prop Deluxe tiller kit Located near Port Dover, Ontario... read more

21' x 8' Aluminum Dory/Work Boat - NEW BUILD â—¦Price: $CALL FOR CURRENT PRICING â—¦3/16 floor with a 3" sub floor and 3/16 checker plate â—¦3/16 walls with a 10" wide wash board â—¦Weighs about 1500 lbs â—¦Location: PEI, Canada File Ref W2388... read more